FF&E installation in San Diego
Received. Stored. Installed.
The short version: One Stop Moving & Storage moves and installs office furniture and equipment (FF&E) across San Diego County. Install crews bill at our hourly rates, $139 an hour for two movers and a truck up to $339 for six, with a written Not-to-Exceed price. Pieces can wait in our 68–72°F vaults until the space is ready.
- Licensed CAL-190616 and USDOT 1956864, moving San Diego businesses since 2008
- $1M general liability and $1M workers’ comp for your building’s certificate of insurance
- Full-time employees on every crew, no day laborers
- Same hourly rate every day, so evening and weekend installs cost no more

Since 2008
Moving San Diego
CAL-190616
California mover license
USDOT 1956864
Interstate, MC 694565
BBB A+
Better Business Bureau
98%
Of our customers come back (company records)
7 days
7 AM–7 PM, phone open 24 hours
What it covers
What does FF&E installation include?
FF&E means furniture, fixtures and equipment. One Stop takes apart, moves, stores, delivers, assembles and places office furniture to your floor plan, from workstations and cubicles to conference tables and file cabinets. Install time is billed at the same crew hourly rate as a move, from $139 an hour for two movers and a truck.
An FF&E job is usually one of three things: moving your existing furniture to a new floor, installing new furniture your dealer has ordered, or both at once during a tenant improvement. The crew and the written estimate are built around which one you have.
The crew takes the empty cartons and packing away as it goes, so the space is clear when your staff sit down.
What we install and place
- Workstations, benching and cubicle panels
- Desks, pedestals and storage towers
- Conference and training tables
- Casegoods, credenzas and bookcases
- File cabinets and lateral files
- Chairs placed to the plan
- Desk equipment wrapped, labeled by user and set at the new desk
Who does what
What it costs
How much does FF&E installation cost in San Diego?
Installation is billed by the hour at our crew rates: $139 for two movers and a truck, $189 for three, $239 for four, $289 for five and $339 for six. Billing runs in 15-minute increments. Every local job gets a written Not-to-Exceed price before work starts.
The rate is the same on weekdays, evenings and weekends, so an install that has to happen after hours costs no more than one during the week.
Bigger crews cost less per mover-hour: $69.50 with two movers, $56.50 with six. On a floor of workstations, a bigger crew usually finishes in fewer billed hours.
Install-day labor by crew
| Crew | 4 hours (minimum) | 8 hours |
|---|---|---|
| 2 movers + truck | $556 | $1,112 |
| 3 movers + truck | $756 | $1,512 |
| 4 movers + truck | $956 | $1,912 |
| 5 movers + truck | $1,156 | $2,312 |
| 6 movers + truck | $1,356 | $2,712 |
The rest of the rate card
Prices from One Stop’s published tariff. Labor only; fuel, drive time and any extra truck are added as shown. Your written estimate covers your floor plan and piece count.
Space not ready?
Can you store office furniture until the space is ready?
Yes. Furniture can wait in storage at our Sorrento Valley facility, where every vault is held at 68–72°F with humidity control. San Diego County storage units run $245 to $730 a month. Loading into storage is $750 per truck, each access visit is $75, and billing is monthly, not prorated.
This is the usual fix when a build-out runs late, when new furniture arrives before the carpet is down, or when an install is split into phases. Pieces stay together by floor, department or phase, so each delivery carries only what that phase needs.
Send the parts list or carton count and the expected ship dates when you book. We plan the storage space and the deliveries from it.

Storage units, per month
| Unit (ft) | San Diego County | Orange County |
|---|---|---|
| 5 × 10 | $245 | $275 |
| 10 × 10 | $355 | $395 |
| 10 × 15 | $445 | $490 |
| 10 × 20 | $555 | $575 |
| 10 × 25 | $625 | $685 |
| 10 × 30 | $730 | $785 |
Other storage charges
Short-term storage during a move is included. Longer stays are billed at the unit prices above.
How it works
How does a phased FF&E install work?
Five stages, from walkthrough to sign-off. We see the space and your plan, send a written price, hold the furniture until each phase is ready, install floor by floor or phase by phase, then walk a punch list with you. Crews work 7 days a week, 7 AM–7 PM, at the same rate every day.
1
Walkthrough
On-site or virtual. We see both spaces, the floor plan, the docks and elevators, and count the pieces.
2
Written price
Crew size, hours, trucks, storage and a Not-to-Exceed price for each local job.
3
Hold and stage
Pieces stored and grouped by floor, department or phase until the site is ready.
4
Install by phase
Delivered, assembled, placed to the plan and leveled, with packing taken away.
5
Punch list
A walk-through with your project or office manager before the crew leaves.
Building rules
Do you handle COIs, freight elevators and loading docks?
Yes. We send each building a certificate of insurance (COI) and book the freight elevator and dock around its move rules. One Stop carries $1M general liability and $1M workers’ comp. If a building asks for higher limits, tell us when you book, ideally at least 7 days before the install.
Downtown towers and the business parks around UTC, Torrey Pines and Sorrento Mesa often set install hours and ask for elevator and floor protection. Floor runners and door-frame protection are included at $0.
Our only office is at 6260 Marindustry Dr in Sorrento Valley (92121), a short drive from the North City business parks.
What buildings usually ask for
Sign-off
What happens at the punch list and sign-off?
Before the crew leaves, we walk the space with your project or office manager against the floor plan. Missing parts, pieces in the wrong room and anything that needs leveling go on a punch list, and the crew fixes what it can that day. Punch-list time bills at the same crew rate, from $139 an hour.
Parts that are missing from the dealer’s shipment are listed so your dealer can send them. When they arrive, a return visit to finish the install is quoted in writing.
What the walk-through checks
- Every station matches its spot on the plan
- Drawers, doors and locks open and close
- Worksurfaces and tables are level
- Chairs and equipment placed by user
- Cartons, packing and debris taken away
- Floors and walls checked where we worked
Before you call
What do you need from us to quote an FF&E install?
Six things: the floor plan, a piece count or parts list, both addresses, the building rules, the dates, and whether anything needs storage first. With those, the written estimate shows the crew, hours, trucks and a Not-to-Exceed price, usually within hours. The phone line, (858) 633-8600, is open 24 hours.
| Send us | Why it matters |
|---|---|
| Floor plan | Sets placement and how many stations the crew builds per hour. |
| Piece count or parts list | Workstations, desks, tables, files and chairs decide the crew size and the hours. |
| Both addresses | Your written Not-to-Exceed price lists the drive between your two addresses with every other charge before move day. |
| Building rules | COI requirements, elevator and dock windows, and allowed install hours. |
| Dates or phases | One weekend, or several phases with storage in between. |
| Storage needs | Units are $245–$730 a month in San Diego County, plus $750 per truck to load in. |
Prices from One Stop’s published tariff. California requires a visual inspection before a written estimate for a move inside the state (Max 4 tariff, Item 108), so we walk the site in person or by video.
Who it’s for
Who books FF&E installation with One Stop?
Offices replacing or adding furniture, tenants finishing a build-out, and labs moving benches and equipment. We install across San Diego County and Orange County at the same hourly crew rates, starting from Sorrento Valley (92121). Lab and medical equipment is quoted in writing after a site survey.
Office moves
Existing workstations taken apart, moved and rebuilt to the new plan, often over a weekend.
Office movingNew furniture installs
Pieces your dealer ordered, held until the floor is ready, then assembled and placed.
Commercial storageLabs and equipment
Benches, instruments and equipment moved with your facility team.
Lab movingQuestions
FF&E installation questions
Short answers. Prices, booking, packing, storage and your rights are covered in full in our FAQ.
All moving questionsWhat does FF&E stand for?
Furniture, fixtures and equipment: the movable pieces in an office, such as workstations, desks, tables, chairs, files and casegoods. One Stop moves, stores and installs them across San Diego County.
How much does office furniture installation cost in San Diego?
One Stop bills installs at its crew rates: $139 an hour for two movers and a truck, up to $339 for six. Four movers cost $239 an hour.
Do you install cubicles and workstations?
Yes. Crews take apart, move and rebuild workstations, benching and cubicle panels to your floor plan, at the same hourly rate as the move, from $139 an hour.
Do I get a fixed price?
Every local job gets a written Not-to-Exceed price before work starts. It’s the most you pay for the job as described, and it comes after we see the space in person or by video.
Can you hold new furniture until our space is ready?
Yes. Storage units at our Sorrento Valley facility run $245 to $730 a month in San Diego County, plus $750 per truck to load in and $75 per access visit. Every vault is held at 68–72°F.
Do you charge more for evening or weekend installs?
No. The hourly rate is the same every day. Crews work 7 days a week, 7 AM to 7 PM; hours outside that window are quoted in writing.
Do you provide a certificate of insurance?
Yes. We send a COI to each building. One Stop carries $1M general liability and $1M workers’ comp. Tell us when you book if a building asks for higher limits.
Can you install in phases?
Yes. Each phase is delivered from storage and installed when its floor or area is ready. Storage bills monthly and isn’t prorated, so plan phases around the billing month.
Who connects power, data and the network?
Your electrician and IT lead. Our crew places and plugs in desk equipment, labeled by user, after your power and data are in.
Do you take the packaging away?
Yes. Empty cartons and packing are taken away as the crew installs, so the space is clear for your staff.
Do you install furniture in Orange County?
Yes, at the same hourly crew rates.
Are your installers employees?
Yes. Every crew is made up of full-time One Stop employees, not day laborers. One Stop is licensed CAL-190616 and USDOT 1956864.
Talk to a person
Get a written FF&E quote
Send the floor plan, the piece count and the dates. You get the crew, the hours, any storage and a Not-to-Exceed price in writing, free, usually within hours. The phone line is open 24 hours.